Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Horn Lake, MS

Overhead Door Rolling Fire Door Inspection & Drop Testing in Horn Lake, MS

Annual drop testing and inspection of rolling fire doors. Typical cost $150-$500.

When your door needs Overhead Door rolling fire door inspection & drop testing, you want it done safely and right the first time. Typical jobs in Horn Lake, MS cost $150-$500, and you approve the price first. Annual drop testing and inspection of rolling fire doors. We work on Overhead Door commercial doors of every age, from older models to current lines, and carry or can source compatible parts.

Is it time for Overhead Door rolling fire door inspection & drop testing?

  • Your annual fire door inspection is due
  • A fire marshal or insurer has noted a deficiency
  • The door failed to close during a test

Why this happens

  • NFPA 80 requires fire doors to be inspected and tested at least once a year

Safe checks before you call

  • Keep the path under fire doors clear at all times.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our Overhead Door rolling fire door inspection & drop testing process

  1. Visually inspect the door and its labels
  2. Perform a drop test
  3. Reset the release mechanism
  4. Repair any deficiencies
  5. Document the results for your records

Typical Overhead Door rolling fire door inspection & drop testing prices

$150-$500Typical range, parts & labor
about 1 hour per doorTypical time on site

What moves the price:

  • Door size, gauge and cycle rating
  • Operator type and controls
  • Parts availability for your model
  • Lift equipment and after-hours access

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Overhead Door services

Serving Horn Lake, MS and nearby towns

Humid air in Mississippi rusts cables, roller bearings and hinges, which makes the door noisy and heavy and eventually makes the opener strain.

Close to the coast, salt air speeds up corrosion. Galvanized or coated springs, nylon rollers and stainless hardware hold up better than bare steel.

Our Overhead Door rolling fire door inspection & drop testing service covers Horn Lake (ZIP code 38637) and nearby towns including Southaven (2.6 mi), Hernando (9.4 mi), Olive Branch (11.6 mi) and Memphis, TN (13.4 mi). Call (833) 435-8883 to book a visit in Horn Lake.

Overhead Door Rolling Fire Door Inspection & Drop Testing: frequently asked questions

How much does Overhead Door rolling fire door inspection & drop testing cost in Horn Lake, MS?

Overhead Door Rolling Fire Door Inspection & Drop Testing typically costs $150-$500 including parts and labor, and usually takes about 1 hour per door. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Overhead Door rolling fire door inspection & drop testing the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Overhead Door rolling fire door inspection & drop testing covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Overhead Door warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Mississippi or Horn Lake requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my commercial door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the commercial door is near the end of its life, replace it. Commercial doors are rated by cycles. If the door has reached its rated cycle life, has several damaged sections, or parts are no longer made, replacing it is often cheaper over the next few years. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Horn Lake, MS

Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Clopay Garage Door Cable Repair

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $150-$350

Richards-Wilcox Weather Seal Replacement

New bottom seals, threshold seals and perimeter stops to keep out water and drafts.

Typical $100-$300

Garage Door Tune-Up & Maintenance

A full inspection, lubrication and adjustment to prevent breakdowns.

Typical $90-$200

LiftMaster Commercial Door Operator Repair

LiftMaster also makes commercial trolley, jackshaft and hoist operators for sectional and rolling doors.

Typical $300-$1,200

Chamberlain Smart Garage Door Opener Setup

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $100-$900

Clopay Weather Seal Replacement

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $100-$300

Northwest Door Extension Spring Replacement

Side-mounted extension springs replaced in matched pairs, with safety cables installed.

Typical $150-$350

Amarr Garage Door Track Repair

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $150-$400

Garage Door Safety Inspection

A full safety check of springs, cables, sensors and auto-reverse.

Typical $75-$150

Richards-Wilcox Garage Door Panel Replacement

Dented, cracked or rusted sections replaced or repaired to match your door.

Typical $300-$900

Midland Garage Door Garage Door Repair

Diagnosis and repair for doors that are stuck, noisy, crooked or won't open or close.

Typical $150-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Horn Lake, MS now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote